technical data sheet sma termination plug 1 watt 32s17b-1.0e3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15; en 122110; mil-std-348 documents n/a material and plating connector parts material plating center conductor brass gold, min. 1.27 m, over nic kel outer conductor brass gold, min. 0.8 m, over nicke l coupling nut brass gold, 0.1 m min. dielectric ptfe gasket silicone substrate al 2 o 3
technical data sheet sma termination plug 1 watt 32s17b-1.0e3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency range dc to 18 ghz return loss 3 26.4 db, dc to 1 ghz 3 19.1 db, 1 ghz to 18 ghz dc resistance 50 w 2.5 w impulse power (1 m s, 1%) 100 watts at 25c environment temperature power handling 1 w at 25c derated linearity to 0 watts at 125c mechanical data mating cycles 3 500 maximum torque 1.70 nm recommended torque 0.90 nm gauge 0.00 mm to 0.25 mm environmental data temperature range -55 c to +155 c rohs compliant packing standard 100 pcs in blister weight 2.3 g/pce draft date approved date rev. engineering change n umber name date kerstin herzog 10.02.05 markus mller 15.09.16 b00 16-1390 marion striegler 15.09.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve o ur products, we reserve the right to make changes judg ed to be necessary.
|
